Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual page 203

Configuring Dynamic Link Aggregation
1
. Local (actor) switch sends
requests to establish a
dynamic aggregate group link
to the remote (partner)
switch.
2
. Partner switch acknowl-
edges that it can accept this
dynamic group.
3
. Actor and partner switches
negotiate parameters for the
dynamic group, producing
optimal settings.
4
. Actor and partner switches
establish the dynamic aggre-
gate group. LACPDU mes-
sages are sent back and forth
to monitor and maintain the
group.
See "Configuring Dynamic Link Aggregate Groups" on page 9-7
Interface (CLI) commands to configure dynamic aggregate groups and see
Aggregation Configuration and Statistics" on page 9-28
dynamic aggregate groups.
OmniSwitch AOS Release 8 Network Configuration Guide
Local (Actor) Switch
Example of a Dynamic Aggregate Group Network
Dynamic Link Aggregation Overview
Dynamic Group
for information on using Command Line
"Displaying Dynamic Link
for information on using the CLI to monitor
December 2017
Remote (Partner) Switch
page 9-6