Power Over Ethernet Specifications; Power Over Ethernet Defaults - Alcatel-Lucent OmniSwitch 6465 Hardware User's Manual

Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
Power Supplies." .
IEEE Standards supported
PoE Class Detection
Platforms supporting PoE
Range of inline power per port
Maximum PoE power per slot

Power over Ethernet Defaults

The following table lists the defaults for PoE configuration:
Parameter
Description
PoE operational status
Power available to a
port
Power available to an
entire slot
Power priority level for
a port
Capacitor detection
method
Priority disconnect sta-
tus
OmniSwitch 6465 Hardware Users Guide
Command(s)
lanpower slot service
lanpower power
lanpower slot maxpower
lanpower priority
lanpower capacitor-detec-
tion
lanpower slot priority-dis-
connect
December 2019
Power over Ethernet Specifications
IEEE 802.3at
Supported
All
802.3at ports - 3000-30000 milliwatts
802.3at ports (HPoE) - 3000-60000 milliwatts
See "Power over Ethernet
Default Value/Comments
Disabled
802.3at ports - 30000 milliwatts
802.3at ports (HPoE) - 60000 milliwatts
See "Power over Ethernet
low
Disabled
Enabled
Chapter 3, "Chassis and
Budget".
Budget".
page 4-3