Application Example 2: Ip Phone — Omniswitch Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Access Guardian
Step 5. ClearPass (802.1X) - Confirm Device Authentication
Confirm device
Authentication
OmniSwitch
Confirm Device
Authentication
ClearPass
Application Example 2: IP Phone — OmniSwitch Configuration
The OmniSwitch configuration for a non-supplicant IP phone:
1
Configure UNP port-based functionality as follows:
-> unp port 1/1/13 port-type bridge
-> unp port 1/1/13 mac-authentication
2
Configure MAC authentication for ClearPass RADIUS on an OmniSwitch as follows:
-> aaa radius-server alu-cppm host 10.255.95.250 key ale
-> aaa device-authentication mac alu-cppm
3
Configure the UNP profile as follows:
-> unp profile UNP-phone
-> unp profile UNP-phone map vlan 1002
OmniSwitch AOS Release 8 Network Configuration Guide December 2017
BYOD Application Examples
page 28-149