Quick Steps For Configuring Erp With Standard Vlans - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring ERP
Quick Steps for Configuring ERP with Standard
VLANs
The following steps provide a quick tutorial for configuring ERP.
1
Create a VLAN using the
-> vlan 1001
-> vlan 1001 members port 1/1-2 tagged
2
Create ERP ring ID 1, ERP Service VLAN and MEG Level and associate two ports to the ring using
the erp-ring command.
-> erp-ring 1 port1 1/1 port2 1/2 service-vlan 1001 level 1
3
Configure the RPL on one node using the
-> erp-ring 1 rpl-node port 1/1
4
Create additional VLANs and add to the ring ports using the
-> vlan 11-20
-> vlan 11-20 members port 1/1-2 tagged
5
Enable the ERP ring configuration using the
-> erp-ring 1 enable
6
Display the ERP configuration using the
-> show erp
OmniSwitch AOS Release 8 Network Configuration Guide
vlan command and add the ring ports.
erp-ring rpl-node
erp-ring enable
show erp
December 2017

Quick Steps for Configuring ERP with Standard VLANs

command.
vlan command.
command.
command.
page 11-10