Chapter 16 Configuring Multiple Vrf - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

16 Configuring Multiple VRF
Multiple Virtual Routing and Forwarding (VRF) provides a mechanism for segmenting Layer 3 traffic into
virtual routing domains (instances) on the same switch. Each routing instance independently maintains its
own routing and forwarding table, peer, and interface information.
In This Chapter
This chapter describes the Multiple VRF feature and how to configure it through the Command Line
Interface (CLI). CLI commands are used in the configuration examples; for more details about the syntax
of commands, see the OmniSwitch AOS Release 8 CLI Reference Guide. This chapter provides an
overview of Multiple VRF and includes the following information:
•
"VRF Defaults" on page
•
"Quick Steps for Configuring Multiple VRF" on page
•
"Multiple VRF Overview" on page
•
"VRF Interaction With Other Features" on page
•
"Configuring VRF Instances" on page
•
"Verifying the VRF Configuration" on page
OmniSwitch AOS Release 8 Network Configuration Guide
16-2.
16-6.
16-11.
16-15.
16-18.
16-3.
December 2017 page 16-1