Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual page 288

Configuring 802.1AB
To disable the Proprietary TLV on a switch, enter the
-> lldp chassis tlv proprietary disable
To disable Proprietary TLV on port, for example port 3 of slot 4, enter the following command at the CLI
prompt:
-> lldp port 1/4/4 tlv proprietary disable
To view the operational status of Proprietary TLV on a switch, use the
To view the AP location, use the
-> show lldp local-port
Local Slot 1/Port 1 LLDP Info:
Port ID
Port Description
Vlan
AP Location
Local Slot 1/Port 2 LLDP Info:
Port ID
Port Description
Vlan
AP Location
The AP location and VLAN information can also be viewed from WebView. To view the information,
from the WebView page:
1
Click on the Physical tab.
2
Click on Adjacencies. Adjacencies home page is displayed.
3
In the Adjacencies home page, select LLDP.
4
Click on Local and select AP Management TLV from the displayed option. This will display the AP
Management TLV information such as Slot, Port, VLAN, and AP Location. A sample screen is displayed
as follows:
OmniSwitch AOS Release 8 Network Configuration Guide
ldp tlv proprietary
show lldp local-port command.
= 1001 (Locally assigned),
= Alcatel-Lucent 1/1,
= 1,
= sw1,
= 1002 (Locally assigned),
= Alcatel-Lucent 1/2,
= 1,
= -,
December 2017
Configuring 802.1AB
command, as shown:
show lldp config command.
page 13-11