Verifying The Mvrp Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring MVRP

Verifying the MVRP Configuration

A summary of the commands used for verifying the MVRP configuration is given here:
show mvrp last-pdu-origin
show mvrp configuration
show mvrp linkagg
show mvrp port
show mvrp vlan-restrictions
show mvrp timer
show mvrp statistics
clear mvrp statistics
For more information about the output details that result from these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide.
OmniSwitch AOS Release 8 Network Configuration Guide
Displays the source MAC address of the last MVRP message
received on specific ports or aggregates.
Displays the global configuration for MVRP.
Displays the MVRP configuration for a specific port or an aggregate
of ports.
Displays the MVRP configurations for all the ports, including timer
values, registration and applicant modes.
Displays the list of VLANS learned through MVRP and their details.
Displays the timer values configured for all the ports or a specific
port.
Displays the MVRP statistics for all the ports, aggregates, or specific
ports.
Clears MVRP statistics for all the ports, an aggregate of ports, or a
specific port.
December 2017
Verifying the MVRP Configuration
page 12-13