Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual page 477

Configuring BFD
Step 4: Configure OSPF Interfaces
Next, OSPF interfaces must be created, enabled, and assigned to area 0.0.0.1. The OSPF interfaces should
have the same interface name as the IP router interfaces created above in
page 20-34.
Router 1
-> ip ospf interface vlan-31
-> ip ospf interface vlan-31 area 0.0.0.0
-> ip ospf interface vlan-31 admin-state enable
-> ip ospf interface vlan-12
-> ip ospf interface vlan-12 area 0.0.0.0
-> ip ospf interface vlan-12 admin-state enable
-> ip ospf interface vlan-10
-> ip ospf interface vlan-10 area 0.0.0.1
-> ip ospf interface vlan-10 admin-state enable
Router 2
-> ip ospf interface vlan-12
-> ip ospf interface vlan-12 area 0.0.0.0
-> ip ospf interface vlan-12 admin-state enable
-> ip ospf interface vlan-23
-> ip ospf interface vlan-23 area 0.0.0.0
-> ip ospf interface vlan-23 admin-state enable
-> ip ospf interface vlan-20
-> ip ospf interface vlan-20 area 0.0.0.2
-> ip ospf interface vlan-20 admin-state enable
Router 3
-> ip ospf interface vlan-23
-> ip ospf interface vlan-23 area 0.0.0.0
-> ip ospf interface vlan-23 admin-state enable
-> ip ospf interface vlan-31
-> ip ospf interface vlan-31 area 0.0.0.0
-> ip ospf interface vlan-31 admin-state enable
-> ip ospf interface vlan-30
-> ip ospf interface vlan-30 area 0.0.0.3
-> ip ospf interface vlan-30 admin-state enable
Step 5: (Optional) Configure BFD Interfaces
Next, BFD interfaces must be created and enabled. The BFD interfaces should have the same interface
name as the IP router interfaces created above in
Router 1
-> ip bfd interface vlan-31
-> ip bfd interface vlan-31 admin-state enable
-> ip bfd interface vlan-12
-> ip bfd interface vlan-12 admin-state enable
OmniSwitch AOS Release 8 Network Configuration Guide
"Step 1: Prepare the Routers" on
"Step 1: Prepare the Routers" on page
December 2017
BFD Application Example
20-34.
page 20-36