Displaying Rmon Tables - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Diagnosing Switch Problems

Displaying RMON Tables

Two separate commands can be used to retrieve and view Remote Monitoring data:
and show rmon events. The retrieved statistics appear in a table format (a collection of related data that
meets the criteria specified in the command you entered). These RMON tables can display the following
kinds of data (depending on the criteria you've specified):
•
The show rmon probes command can display a list of current RMON probes or statistics for a
particular RMON probe.
•
The show rmon events command can display a list of RMON events (actions that occur in response to
Alarm conditions detected by an RMON probe) or statistics for a particular RMON event.
Displaying a List of RMON Probes
To view a list of current RMON probes, enter the
without specifying an entry number for a particular probe.
For example, to show a list of the statistics probes, enter:
-> show rmon probes stats
A display showing all current statistics RMON probes must appear, as shown in the following example:
Entry Slot/Port
-------+-----------+-----------+----------+---------------+--------------------
4001 4/1
4008 4/8
4005 4/5
This table entry displays probe statistics for all probes on the switch. The probes are active, utilize 275
bytes of memory, and 25 minutes have elapsed since the last change in status occurred.
To show a list of the history probes, enter:
-> show rmon probes history
A display showing all current history RMON probes must appear, as shown in the following example:
Entry Slot/Port
-------+-----------+-----------+----------+---------------+--------------------
1 1/1
30562 1/35
30817 1/47
The table entry displays statistics for RMON History probes on the switch.
To show a list of the alarm probes, enter:
-> show rmon probes alarm
A display showing all current alarm RMON probes must appear, as shown in the following example:
Entry Slot/Port
-------+-----------+-----------+----------+---------------+--------------------
31927 1/35
OmniSwitch AOS Release 8 Network Configuration Guide
show rmon probes
Flavor Status
Ethernet Active
Ethernet Active
Ethernet Active
Flavor Status
History Active
History Active
History Active
Flavor Status
Alarm Active
December 2017
Remote Monitoring (RMON)
show rmon probes
command with the probe type,
Duration System Resources
00:25:00 275 bytes
00:25:00 275 bytes
00:25:00 275 bytes
Duration System Resources
92:52:20 5464 bytes
00:31:22 312236 bytes
00:07:31 5200236 bytes
Duration System Resources
00:25:51 608 bytes
page 34-31