Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual page 913

Configuring Application Fingerprinting
Verifying the AFP Mode Configuration
The QoS and UNP modes both specify application groups for AFP processing. This difference is that the
QoS mode directly associates a policy list name with the AFP port, but the UNP mode uses a policy list
assigned to a UNP associated with traffic received on the AFP port. The monitoring mode does just that,
monitors application group traffic, but does not apply any QoS.
To verify the AFP port configuration for the switch, use the
example:
-> show app-fingerprint port
Legend: * = Port or App-Group is invalid
Port Operation Mode
--------+----------------+----------------------------------------
1/2/1 Monitoring
1/2/1 QoS
1/2/1 QoS
-> show app-fingerprint linkagg
Legend: * = Port or App-Group is invalid
Port Operation Mode
--------+----------------+----------------------------------------
0/100 Monitoring
0/100 QoS
0/100 QoS
OmniSwitch AOS Release 8 Network Configuration Guide
show app-fingerprint port
App-group/Policy-list
Testing13
list1
list2
App-group/Policy-list
Testing16
list3
list4
December 2017
Configuring AFP
command. For
page 30-17