Dhcp Relay Overview - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Omniswitch aos release 8
Table of Contents

Advertisement

Configuring DHCP Relay

DHCP Relay Overview

The DHCP Relay service, its corresponding port numbers, and configurable options are as follows:
DHCP Relay Service: BOOTP/DHCP
UDP Port Numbers 67/68 for Request/Response
Configurable options: DHCP server IP address, Forward Delay, Maximum Hops, Forwarding Option,
automatic switch IP configuration
The port numbers indicate the destination port numbers in the UDP header. The DHCP Relay verifies
whether the forward delay time (specified by the user) has elapsed before sending the packet down to
UDP with the destination IP address replaced by the address (also specified by the user).
If the relay is configured with multiple IP addresses, then the packet is sent to all IP address destinations.
The DHCP Relay also verifies that the maximum hop count has not been exceeded. If the forward delay
time is not met or the maximum hop count is exceeded, the BOOTP/DHCP packet is discarded by the
DHCP Relay.
The forwarding option allows you to specify if the relay must operate in the standard and per-VLAN-only
mode. The standard mode forwards all DHCP packets on a global relay service. The per-VLAN-only
mode forwards DHCP packets that originate from a specific VLAN. See
Option" on page 21-10
An additional function provided by the DHCP Relay service enables automatic IP address configuration
for default VLAN 1 when an unconfigured switch boots up. If this function is enabled, the switch
broadcasts a BootP or a DHCP request packet at boot time. When the switch receives an IP address from a
BootP/DHCP server, the address is assigned to default VLAN 1. See
Configuration" on page 21-11
Alternately, the relay function can be provided by an external router connected to the switch; in this case,
the relay is configured on the external router.
OmniSwitch AOS Release 8 Network Configuration Guide
for more information.
for more information.
"Setting the Relay Forwarding
"Enabling Automatic IP
December 2017
DHCP Relay Overview
page 21-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents