High Availability Default Values - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring High Availability VLANs

High Availability Default Values

The table below lists default values for high availability VLAN software.
Parameter Description
Server cluster admin state of the
server cluster
Server cluster id and mode
Mac address of the server cluster
IP address of the server cluster
Configure the port/linkagg of a
server cluster
OmniSwitch AOS Release 8 Network Configuration Guide
Command
server-cluster
server-cluster
server-cluster mac-address
server-cluster ip
server-cluster port
server-cluster linkagg
December 2017
High Availability Default Values
Default Value/Comments
admin-state - enable
mode - L2
None
IP address is configurable only
for L3 clusters.
None
page 5-2