Verifying Appmon Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Application Monitoring and Enforcement

Verifying AppMon Configuration

A summary of the show commands used for verifying the AppMon configuration is given here.
show app-mon config
show app-mon port
show app-mon app-pool
show app-mon app-list
show app-mon app-group
show app-mon app-record
show app-mon ipv4-flow-table
show app-mon ipv6-flow-table
show app-mon l4port-exclude
show app-mon stats
show app-mon aging
enforcement
show app-mon vc-topology
OmniSwitch AOS Release 8 Network Configuration Guide
Displays global AppMon configuration, which includes information
about admin-state, running mode, IP mode, aging-timer, and total
signatures.
Displays AppMon status per physical port or per slot for the switch.
Displays all the applications that are part of an application pool.
Displays a list of applications and application groups added to an
application list.
Displays the details of all the applications in an application group.
Displays current-hour application-record information as well the
historic application-records on the hourly or 24-hours basis for
monitored applications.
Displays the flow table for IPv4 flows entries for enforcement and
monitor flows.
Displays the flow table for IPv6 flows entries for enforcement and
monitor flows.
Displays the port range excluded from AppMon operation.
Displays the number of flow statistics.
Displays the aging interval for each application for enforcement feature.
Displays the AppMon VC topology.
December 2017
Verifying AppMon Configuration
page 29-20