Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual page 201

Configuring Dynamic Link Aggregation
Note. As an option, you can verify your dynamic aggregation group settings with the
command on either the actor or the partner switch. For example:
-> show linkagg agg 2
Dynamic Aggregate
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports : 8,
Number of Reserved Ports : 8,
Number of Attached Ports : 8,
Primary Port
LACP
MACAddress
Actor System Id
Actor System Priority
Actor Admin Key
Actor Oper Key
Partner System Id
Partner System Priority : 0,
Partner Admin Key
Partner Oper Key
When multi-chassis link aggregation feature is activated on the switch, the show linkagg agg command
displays the output as MC-Dynamic aggregate.
You can also use the
"Displaying Dynamic Link Aggregation Configuration and Statistics" on page 9-28
on show commands.
An example of what these commands look like entered sequentially on the actor switch command line:
-> linkagg lacp agg 2 size 8 actor admin-key 5
-> linkagg lacp port 1/1 actor admin-key 5
-> linkagg lacp port 1/4 actor admin-key 5
-> linkagg lacp port 3/3 actor admin-key 5
-> linkagg lacp port 5/4 actor admin-key 5
-> linkagg lacp port 6/1-2 actor admin-key 5
-> linkagg lacp port 7/3 actor admin-key 5
-> linkagg lacp port 8/1 actor admin-key 5
-> vlan 2 port default 2
An example of what these commands look like entered sequentially on the partner switch command line:
-> linkagg lacp agg 2 size 8 actor admin-key 5
-> linkagg lacp port 2/1 actor admin-key 5
-> linkagg lacp port 3/1 actor admin-key 5
-> linkagg lacp port 3/3 actor admin-key 5
-> linkagg lacp port 3/6 actor admin-key 5
-> linkagg lacp port 5/1 actor admin-key 5
-> linkagg lacp port 5/6 actor admin-key 5
-> linkagg lacp port 8/1 actor admin-key 5
-> linkagg lacp port 8/3 actor admin-key 5
-> vlan 2 port default 2
OmniSwitch AOS Release 8 Network Configuration Guide
: 40000002,
: 2,
: Dynamic Aggregate Number 2 ref 40000002 size 8,
: ,
: ENABLED,
: UP,
: 8,
: 1/1,
: [00:1f:cc:00:00:00],
: [00:20:da:81:d5:b0],
: 0,
: 5,
: 0,
: [00:20:da:81:d5:b1],
: 5,
: 0
show linkagg port port command to display information on specific ports. See
Quick Steps for Configuring Dynamic Link Aggregation
December 2017
linkagg range
for more information
page 9-4