Configuration Guidelines - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Access Guardian
2.
Switch classifies AP into the
defaultWLANProfile; AP assigned
to VLAN 125.
7.
Trust tag enabled on 1/1/1; switch
dynamically assigns Guest client
traffic into VLAN 10.
1.
AP connected to UNP bridge
port 1/1/1 sends LLDP MED TLV.
5.
AP updates context with:
- Management VLAN = 125
- AP Location = Building1:1/1/1
AP Traffic Flow
Untagged AP management traffic
Tagged AP client traffic

Configuration Guidelines

Consider the following guidelines when configuring the OmniSwitch feature components that are required
to discover and integrate wireless traffic that is forwarded by OmniAccess Stellar AP devices into an
OmniSwitch network:
OmniSwitch AOS Release 8 Network Configuration Guide
LAN
VLAN 125
(10.255.125.1/24)
1/1/24
1/1/1
Stellar-AP
OmniSwitch AP Discovery and Integration Example
OmniAccess Stellar AP Integration
DHCP Server
DHCP scope:
10.255.125.0/24 (AP management subnet)
10.255.10.0/24 (AP client subnet)
VLAN 10
(10.255.10.1/24)
4.
Switch sends LLDP with:
- Port VLAN ID = 125
- AP Location = Building1:1/1/1
8.
Wireless client DHCP request
sent on VLAN 10.
3.
AP sends untagged DHCP request
on VLAN 125 to obtain IP address.
6.
Wireless client connects to
Guest SSID (VLAN 10 tag).
December 2017 page 28-70