File System Naming Conventions - H3C S5830V2 Configuration Manual

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type trunk
For another example, on the IRF fabric Master, Ten-GigabitEthernet 3/0/1 represents the first fixed port
on member device 3. Set its link type to trunk, as follows:
<Master> system-view
[Master] interface ten-gigabitethernet 3/0/1
[Master-Ten-GigabitEthernet3/0/1] port link-type trunk

File system naming conventions

On a standalone device, you can use its storage device name to access its file system. For more
information about storage device naming conventions, see Fundamentals Configuration Guide.
On an IRF fabric, you can use the storage device name to access the file system of the master. To access
the file system of any other member device, use the name in the slotmember-ID#storage-device-name
format. For example:
To access the test folder under the root directory of the flash memory on the master device:
<Master> mkdir test
Creating directory flash:/test... Done.
<Master> dir
Directory of flash:
0 -rw-
1 drw-
2 -rw-
3 -rw-
4 -rw-
5 -rw-
6 drw-
7 drw-
8 -rw-
9 drw-
10 -rw-
11 -rw-
12 -rw-
13 -rw-
14 drw-
25 drw-
524288 KB total (365292 KB free)
To create and access the test folder under the root directory of the flash memory on member device 3:
<Master> mkdir slot3#flash:/test
Creating directory slot3#flash:/test... Done.
<Master> cd slot3#flash:/test
<Master> pwd
slot3#flash:/test
Or:
43548660 Jan 01 2011 08:21:29
- Jan 01 2011 00:00:30
567 Jan 02 2011 01:41:54
735 Jan 02 2011 01:42:03
36 Jan 01 2011 00:07:52
0 Jan 01 2011 00:53:09
- Jan 01 2011 06:33:55
- Jan 02 2000 00:00:07
23724032 Jan 01 2011 00:49:47
- Jan 01 2000 00:00:07
591 Jan 02 2011 01:42:03
4609 Jan 01 2011 00:07:53
3626 Jan 01 2011 01:51:56
78833 Jan 01 2011 00:07:53
- Jan 01 2011 00:15:48
- Jan 01 2011 04:16:53
5800.ipe
diagfile
dsakey
hostkey
ifindex.dat
lauth.dat
license
logfile
s5820v2_5830v2-cmw710-system-r2108p03.bin
seclog
serverkey
startup.cfg
startup.cfg_bak
startup.mdb
test
versionInfo
5