Troubleshooting Overview - Polycom SpectraLink 6000 Maintenance And Diagnostics

Troubleshooting Overview

PN: 1725-36123-001_K.doc
The SpectraLink 6000 System software constantly monitors system
components for problems. If a problem is detected, the system will
flag the problem with an alarm. Alarms are displayed in two places:
Operator's Console
The Chk3000 program allows the administrator or technician to
display details about each system component. If the component is in
an alarm state, details about the alarm will display on the appropriate
screen. See the SpectraLink 6300 MCU: Operator's Console manual for
more information.
LEDs
The front panels of all system cards (System Controller, Shelf
Controller, and Interface Modules) have six LEDs: one red (labeled
), and five green (labeled
ALARM
including alarm conditions. LED sequences, descriptions, and
recommended procedures are provided in Chapter 7 LED and Alarm
Troubleshooting Tables covering troubleshooting for each type of card
through ) to indicate status,
1 5
1
9