AudioCodes Mediant 800B User Manual page 733

User's Manual
Parameter
Name
name
[SBCRoutingPolicy_Name]
LDAP Servers Group Name
ldap-srv-group-name
[SBCRoutingPolicy_LdapS
erversGroupName]
Least Cost Routing
LCR Feature
lcr-enable
[SBCRoutingPolicy_LCREnabl
e]
Default Call Cost
lcr-default-cost
[SBCRoutingPolicy_LCRDefau
ltCost]
Version 7.2
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, no
name is defined. If you don't configure a name, the device
automatically assigns a name in the following format:
"SBCRoutingPolicy_<Index>", for example, "SBCRoutingPolicy_2".
Note: Each row must be configured with a unique name.
Assigns an LDAP Server Group to the Routing Policy. Routing rules
in the IP-to-IP Routing table that are associated with the Routing
Policy and that are configured with LDAP and/or Call Setup Rules,
use the LDAP server(s) configured for this LDAP Server Group.
By default, no value is defined.
For more information on LDAP Server Groups, see 'Configuring
LDAP Server Groups' on page 256.
Note: The default Routing Policy is assigned the default LDAP
Server Group ("DefaultCTRLServersGroup").
Enables the Least Cost Routing (LCR) feature for the Routing
Policy.

[0] Disable (default)

[1] Enable
For more information on LCR, see 'Least Cost Routing' on page
283.
Defines whether routing rules in the IP-to-IP Routing table that are
not assigned a Cost Group are considered a higher cost or lower
cost route compared to other matched routing rules that are
assigned Cost Groups.

[0] Lowest Cost = (Default) The device considers a matched
routing rule (belonging to the Routing Policy) that is not assigned
a Cost Group as the lowest cost route. Therefore, it uses the
routing rule.

[1] Highest Cost = The device considers a matched routing rule
(belonging to the Routing Policy) that is not assigned a Cost
Group as the highest cost route. Therefore, it is only used if the
other matched routing rules that are assigned Cost Groups are
unavailable.
Note: If multiple matched routing rules without an assigned Cost
Group exist, the device selects the first matched rule in the table.
733
Description
Mediant 800B Gateway & E-SBC
34. Routing SBC