AudioCodes Mediant 800B User Manual page 293

User's Manual
3. Click New; the following dialog box appears:
4. Configure an HTTP remote host according to the parameters described in the table below.
5. Click Apply, and then save your settings to flash memory.
Table 15-20: HTTP Remote Hosts Table Parameter Descriptions
Parameter
Index
rest-servers
[HTTPRemoteHosts_RemoteHostindex]
Name
[HTTPRemoteHosts_Name]
Address
rest-address
[HTTPRemoteHosts_Address]
Version 7.2
Figure 15-44: HTTP Remote Hosts Table - Add Dialog Box
Defines an index number for the new table row.
Note:


Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters. By default, no
value is defined.
Note:


Defines the address (IP address or FQDN) of the remote host.
The valid value is a string of up to 80 characters.
Note:



Description
Each row must be configured with a unique index.
The parameter is mandatory.
Each row must be configured with a unique name.
The parameter is mandatory.
An IPv6 address can only be configured if the interface is a
CONTROL type.
If the address is an FQDN and the DNS resolution results in
multiple IP addresses, the device device attempts to
establish multiple connections (sessions) for each IP
address. Only the first 10 resolved IP addresses are used
regardless of the number of hosts.
FQDN resolution is also performed (immediately) when
connection is subsequently "closed" (by timeout or by the
remote host) and connections are updated accordingly. In
addition, the device periodically (every 15 minutes) performs
DNS name resolution to ensure that the list of resolved IP
293 Mediant 800B Gateway & E-SBC
15. Services