AudioCodes Mediant 800B User Manual page 261

User's Manual
Parameter
Verify Certificate
verify-certificate
[LdapConfiguration_VerifyCertific
ate]
Connection Status
connection-status
[LdapConfiguration_Connection
Status]
Query
LDAP Password
password
[LdapConfiguration_LdapConfPa
ssword]
Version 7.2
Enables certificate verification when the connection with the LDAP
server uses TLS.

[0] No = (Default) No certificate verification is done.

[1] Yes = The device verifies the authentication of the
certificate received from the LDAP server. The device
authenticates the certificate against the trusted root certificate
store associated with the associated TLS Context (see 'TLS
Context' parameter above) and if ok, allows communication
with the LDAP server. If authentication fails, the device denies
communication (i.e., handshake fails). The device can also
authenticate the certificate by querying with an Online
Certificate Status Protocol (OCSP) server whether the
certificate has been revoked. This is also configured for the
associated TLS Context.
Note: The parameter is applicable only if the 'Use TLS' parameter
is configured to Yes.
(Read-only) Displays the connection status with the LDAP server.

"Not Applicable"

"LDAP Connection Broken"

"Connecting"

"Connected"
For more information about a disconnected LDAP connection,
see your Syslog messages generated by the device.
Defines the user password for accessing the LDAP server during
connection and binding operations.

LDAP-based SIP queries: The parameter is the password used
by the device to authenticate itself, as a client, to obtain LDAP
service from the LDAP server.

LDAP-based user login authentication: The parameter
represents the login password entered by the user during a
login attempt. You can use the $ (dollar) sign in this value to
enable the device to automatically replace the $ sign with the
user's login password in the search filter, which it sends to the
LDAP server for authenticating the user's username-password
combination. For example, $.
Note:

The parameter is mandatory.

By default, the device sends the password in clear-text format.
You can enable the device to encrypt the password using TLS
(see the 'Use SSL' parameter below).
261
Description
Mediant 800B Gateway & E-SBC
15. Services