AudioCodes Mediant 800B User Manual page 530

Parameter
Destination Phone Prefix
dst-phone-prefix
[PREFIX_DestinationPrefix]
Action
Destination IP Group
dst-ip-group-id
[PREFIX_DestIPGroupName]
User's Manual
without a calling number, use the $ sign. For a description of
available notations, see 'Dialing Plan Notation for Routing and
Manipulation Tables' on page 1051.
The number can include up to 50 digits.
Defines the prefix and/or suffix of the called (destination)
telephone number. The suffix is enclosed in parenthesis after the
suffix value. You can use special notations for denoting the prefix.
For example, [100-199](100,101,105) denotes a number that
starts with 100 to 199 and ends with 100, 101 or 105. To denote
any prefix, use the asterisk (*) symbol (default) or to denote calls
without a called number, use the $ sign. For a description of
available notations, see 'Dialing Plan Notation for Routing and
Manipulation Tables' on page 1051.
The number can include up to 50 digits.
Note:

For LDAP-based routing, enter the LDAP query keyword as
the prefix number to denote the IP domain:

"PRIVATE" = Private number

"OCS" = Skype for Business / OCS client number

"PBX" = PBX / IP PBX number

"MOBILE" = Mobile number

"LDAP_ERR" = LDAP query failure
For more information, see AD-based Routing for Microsoft
Skype for Business on page 276.

If you want to configure re-routing of ISDN Tel-to-IP calls to fax
destinations, enter the value string "FAX" (case-sensitive) as
the destination phone prefix. For more information, see the
FaxReroutingMode parameter.
Assigns an IP Group to where you want to route the call. The SIP
INVITE message is sent to the IP address configured for the
Proxy Set that is associated with the IP Group.
Note:

If you select an IP Group, you do not need to configure a
destination IP address. However, if both parameters are
configured in the table, the INVITE message is sent only to the
IP Group.

If the destination is a User-type IP Group, the device searches
for a match of the Request-URI in the received INVITE to an
AOR registration record in the device's database. The INVITE
is then sent to the IP address of the registered contact.

If the AlwaysUseRouteTable parameter is set to 1 (see
'Configuring IP Groups' on page 365), the Request-URI host
name in the INVITE message is set to the value configured for
the 'Destination IP Address' parameter (in this table);
otherwise, if no IP address is defined, it is set to the value of
the 'SIP Group Name' parameter (configured in the IP Groups
table).

The parameter is used as the 'Serving IP Group' in the
Accounts table for acquiring authentication
username/password for this call (see 'Configuring Registration
Accounts' on page 395).
530
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10632