AudioCodes Mediant 800B User Manual page 257

User's Manual
2. Click New; the following dialog box appears:
Figure 15-21: LDAP Server Groups Table - Add Dialog Box
3. Configure an LDAP Server Group according to the parameters described in the table
below.
4. Click Apply.
Table 15-8: LDAP Server Groups Table Parameter Descriptions
Parameter
General
Index
[LdapServerGroups_Index]
Name
name
[LdapServerGroups_Name]
Type
server-type
[LdapServerGroups_ServerType]
Server Search Method
server-search-method
[LdapServerGroups_SearchMethod
]
Version 7.2
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
Defines whether the servers in the group are used for SIP-
related LDAP queries (Control) or management login
authentication-related LDAP queries (Management).

[0] Control (Default)

[1] Management
Note: Only one LDAP Server Group can be defined for
management.
Defines the method for querying between the two LDAP
servers in the group.

[0] Parallel = (Default) The device queries the LDAP servers
at the same time.

[1] Sequential = The device first queries one of the LDAP
servers and if the DN object is not found or the search fails,
it queries the second LDAP server.
257
Description
Mediant 800B Gateway & E-SBC
15. Services