AudioCodes Mediant 800B User Manual page 259

User's Manual
2. Click New; the following dialog box appears:
3. Configure an LDAP server according to the parameters described in the table below.
4. Click Apply.
Table 15-9: LDAP Servers Table Parameter Descriptions
Parameter
General
Index
[LdapConfiguration_Index]
LDAP Servers Group
server-group
[LdapConfiguration_Group]
LDAP Network Interface
interface-type
[LdapConfiguration_Interface]
Version 7.2
Figure 15-22: LDAP Servers Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns the LDAP server to an LDAP Server Group, configured in
the LDAP Server Groups table (see 'Configuring LDAP Server
Groups' on page 256).
Note:

The parameter is mandatory and must be set before
configuring the other parameters in the table.

Up to two LDAP servers can be assigned to the same LDAP
Server Group.
Assigns one of the device's IP network interfaces through which
communication with the LDAP server is done.
By default, no value is defined and the device uses the OAMP
network interface, configured in the IP Interfaces table.
To configure IP network interfaces, see 'Configuring IP Network
Interfaces' on page 146.
Note: The parameter is mandatory.
Description
259 Mediant 800B Gateway & E-SBC
15. Services