Pre-Configured Ip-To-Ip Routing Rules; Normal Mode - AudioCodes Mediant 800B User Manual

40.4

Pre-Configured IP-to-IP Routing Rules

For the CRP application, the IP-to-IP Routing table is pre-configured with IP-to-IP routing rules.
These rules depend on the configured Call Survivability mode, as described in 'Configuring Call
Survivability Mode' on page 796.
Note:
•
The IP-to-IP Routing table is read-only.
•
For accessing the IP-to-IP Routing table and for a description of its parameters, see
'Configuring SBC IP-to-IP Routing Rules' on page 709.

40.4.1 Normal Mode

The pre-configured IP-to-IP routing rules for the Normal CRP call survivability mode are shown in
the table below:
Table 40-2: Pre-Configured IP-to-IP Routing Rules for CRP Normal Mode
Index Source IP
Group /
Emergency
1 Any
3 #1 [CRP
Users]
4 #1 [CRP
Users]
5 #1 [CRP
Users]
6 #2 [CRP
Proxy]
7 #2 [CRP
Proxy]
8 #3 [CRP
Gateway]
9 #3 [CRP
Gateway]
Note:
'Configuring PSTN Fallback' on page 800). This routing rule is used if the device can't find
a matching destination user for IP Group 1 (User-type IP Group) in its registration
database. If the CRPGatewayFallback parameter is disabled and no matching user is find,
the device rejects the call.
User's Manual
Request Destination
Type Type
OPTIONS Dest Address
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
Index 7 appears only if the CRPGatewayFallback parameter is enabled (see
Mediant 800B Gateway & E-SBC
Destination
IP Group
-
#2 [CRP
Proxy]
#1 [CRP
Users]
#3 [CRP
Gateway]
#1 [CRP
Users]
#3 [CRP
Gateway]
#2 [CRP
Proxy]
#1 [CRP
Users]
798
Destination Alternative Route
Address Options
Internal Route Row
- Route Row
- Alternative Route
Ignore Inputs
- Alternative Route
Ignore Inputs
- Route Row
- Route Row
- Route Row
- Alternative Route
Ignore Inputs
Document #: LTRT-10632