AudioCodes Mediant 800B User Manual page 1041

User's Manual
displayed under the Statistics group, as shown in the example below:
Note:
are reset.
The statistics fields are described in the following table:
Statistics Field
Active Calls
Call Attempts
Total Established Calls
Total Failed Attempts
Remote Disconnections Count
Average CPS
Elapsed Time
Test Status
Version 7.2
Figure 69-2: Viewing Test Call Statistics
On the receiving side, when the first call is accepted in "Idle" state, statistics
Table 69-3: Test Call Statistics Description
Number of currently established test calls.
Number of calls that were attempted.
Total number of calls that were successfully established.
Total number of call attempts that failed.
Number of calls that were disconnected by the remote side.
Average calls per second.
Duration of the test call since it was started (or restarted).
Status (brief description) as displayed in the 'Test Status' field
(see 'Viewing Test Call Status' on page 1040).
Description
1041 Mediant 800B Gateway & E-SBC
69. Testing SIP Signaling Calls