AudioCodes Mediant 800B User Manual page 999

User's Manual
VSAs are sent with a general RADIUS ID of 26 to indicate that they are vendor-
specific (non-standard). In addition, the company's registered vendor ID (as registered
with the Internet Assigned Numbers Authority or IANA) is also included in the packet.
The device's default vendor ID is 5003, which can be changed (see 'Configuring the
RADIUS Vendor ID' on page 249). The VSA ID is also included in the packet.
The following figure shows a vendor-specific RADIUS attribute collected by Wireshark.
The bottom pane shows the RADIUS attribute information as sent in the packet; the
upper pane is Wireshark's interpretation of the RADIUS information in a more
readable format. The example shows the attribute in string-of-characters format.
Figure 63-15: Example of Vendor-Specific RADIUS Attribute Collected by Wireshark
Note:
more information, see Customizing CDRs for Gateway Calls on page 986 and
Customizing CDRs for SBC Calls on page 990.
To configure the address of the RADIUS Accounting server, see 'Configuring RADIUS
Servers' on page 246. For all RADIUS-related configuration, see 'RADIUS-based Services'
on page 246.

To configure RADIUS accounting:
1. Open the Call Detail Record Settings page (Troubleshoot menu > Troubleshoot tab
> Call Detail Record folder > Call Detail Record Settings).
2. Configure the following parameters:
•
From the 'Enable RADIUS Access Control' drop-down list (EnableRADIUS),
select Enable.
•
From the 'RADIUS Accounting Type' drop-down list (RADIUSAccountingType),
select the stage of the call that RADIUS accounting messages are sent to the
RADIUS accounting server.
•
From the 'AAA Indications' drop-down list (AAAIndications), select whether you
want Authentication, Authorization and Accounting (AAA) indications.
Version 7.2
Figure 63-14: Example of a Vendor-Specific Attribute
You can customize the prefix title of the RADIUS attribute name and the ID. For
63. Reporting Information to External Party
999 Mediant 800B Gateway & E-SBC