Message Waiting Indication Parameters - AudioCodes Mediant 800B User Manual

Gateway & enterprise sbc (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

Parameter
Call Forward Reminder Ring Parameters
Note:
These parameters are applicable only to FXS interfaces.
For a description of this feature, see Call Forward Reminder Ring on page 593.
Enable NRT Subscription
configure voip > gateway
dtmf-supp-service supp-
service-settings > nrt-
subscription
[EnableNRTSubscription]
AS Subscribe IPGroupID
configure voip > gateway
dtmf-supp-service supp-
service-settings > as-
subs-ipgroupid
[ASSubscribeIPGroupID]
NRT Subscribe Retry
Time
configure voip > gateway
dtmf-supp-service supp-
service-settings > nrt-sub-
retry-time
[NRTSubscribeRetryTime]
Call Forward Ring Tone
ID
configure voip > gateway
dtmf-supp-service supp-
service-settings > cfe-
ring-tone-id
[CallForwardRingToneID]
72.11.5.4

Message Waiting Indication Parameters

The message waiting indication (MWI) parameters are described in the table below.
Parameter
Enable MWI
configure voip > gateway dtmf-
supp-service supp-service-
settings > enable-mwi
[EnableMWI]
User's Manual
Module 1 to an IP address upon On Busy:
FwdInfo 1 = 1,2003@10.5.1.1,30,1,2;
For more information, see Configuring Call Forward on page 638.
Note: The parameter is applicable only to analog interfaces.
Enables endpoint subscription for Ring reminder event notification
feature.
[0] Disable (default)
[1] Enable
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not configured).
Defines the Retry period (in seconds) for Dialog subscription if a previous
request failed.
The valid value range is 10 to 7200. The default is 120.
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.
Table 72-47: MWI Parameters
Enables Message Waiting Indication (MWI).
[0] Disable (default)
[1] Enable
Note:
The parameter is applicable only to FXS interfaces.
1196
Mediant 800B Gateway & E-SBC
Description
Description
Document #: LTRT-10632

Advertisement

Table of Contents
loading

Table of Contents