AudioCodes Mediant 800B User Manual page 346

2. Select the Media Realm for which you want to add Remote Media Extensions, and
then click the Media Realm Extension link located below the table; the Media Realm
Extension table appears.
3. Click New; the following dialog box appears:
Figure 17-5: Media Realm Extension Table - Add Dialog Box
4. Configure the Media Realm Extension according to the parameters described in the
table below.
5. Click Apply.
Table 17-3: Media Realm Extension Table Parameter Descriptions
Parameter
Index
[MediaRealmExtension_ExtensionIndex]
IPv4 Interface Name
[MediaRealmExtension_IPv4IF]
User's Manual
Description
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns an IPv4 network interface (configured in the IP
Interfaces table) to the Media Realm Extension.
By default, no value is defined.
To configure IP network interfaces, see 'Configuring IP
Network Interfaces' on page 146.
Note:

The parameter is mandatory.

You must configure the Media Realm Extension with
an IP network interface that has the same IP
version(s) as the Media Realm to which the Media
Realm Extension is associated. If the associated
Media Realm is assigned both an IPv4 and IPv6
network interface, you also need to assign the Media
Realm Extension with both an IPv4 and IPv6 network
interface. For example, if the associated Media
Realm is assigned only an IPv4 network interface,
you also need to assign the Media Realm Extension
with an IPv4 network interface.
346
Mediant 800B Gateway & E-SBC
Document #: LTRT-10632