Version Display (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Precondition for manual DO variable assignment
It is only possible to manually assign DO variables if no Comparison topology and no User-
specified topology is used and in Expert a DO variable list was configured.
It is notpermissible that "Execute axis-drive assignment" is set as in this case, it is not possible.
For an interactive manual assignment of the DO variables by toggling to the SINAMICS
components, a DO variable must first be assigned to a Motor Module before the DO variable
can be assigned to a Sensor Module, so that the sensors can be assigned to axes/drives.
DO variables
A list with all DO variables, which are in the DO variable list, are in the upper part of the dialog
page.
The properties of the DO variables are specified in this list, and using a checkmark at the
beginning of the line it is indicated whether a DO variable is used, i.e was assigned to a drive
object.
DRIVE-CLiQ wiring
The Drive-CLiQ wiring of the components and the assignments of the DO variables to these
are displayed in the center of the dialog page.
The "SM" column indicates as to whether a sensor module involves a first or second encoder.
Sensor modules are displayed in blue.
Comparison topology (*.ust)
The "Comparison topology" drop-down list remains empty for manual DO variable
assignment.
Displaying additional details
Additional information can be hidden or displayed for diagnostics in the list and tree view using
the "Display additional details" checkbox.
Additional information
You will find additional information on package execution in the section under Package
execution (Page 317).
4.4.2.30

Version display (configuration)

You can configure the following property groups for the "Version Display" dialog page:
● Dialog
● Operating instructions
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.4 Project folder
179