Siemens SINUMERIK 840D sl Operating Manual page 174

Create MyConfig - Expert
4.4 Project folder
importance for the purely manual method of operation, where the user on the machine toggles
the DO variables to the DOs.
By assigning a DO variable, all components are identified that belong to a drive object (e.g. a
Motor Module, two Sensor Modules).
During package execution, values are assigned to the properties of the DO variables so that,
for example, indirect addressing of the DOs for reading and writing parameters can be
performed.
The DO variable list can be exported, imported, or linked. We recommend using the same list
in Expert and Topo. The easiest way to accomplish this is to externally save this list and link
it in Expert and in Topo. The list can then be viewed and edited by both Expert and Topo.
Note
For DO manipulations using a comparison topology, user-specified topology, or DO list
When changing the DO number, the assigned PS file is renamed and parameters p101 and
p978 of the higher-level CU are adapted.
The DO name is entered in parameter p199 of the relevant DO, and the DO variable name in
parameter p9489.
BiCos are not automatically adapted. This should be noted particularly for the Line Module.
Note
Conflicts in the case of identical names
Conflicts between DO variables as regard type, number, or name result in errors.
Note
The TM31 Terminal Module is not supported by CNC SW 4.4 SP1 with Create MyConfig.
Dialog scripts
Under "Dialog scripts", entry "Scripts", via the button
topology' Edit event scripts". Here you can edit scripts that are to be executed at selectable
times during package processing.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 115)".
You can find examples for the dialog scripts for the SINAMICS topology in "Examples of scripts
in dialog pages (Page 119)".
174
you open the "Dialog 'SINAMICS
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD