Create MyConfig - Expert
4.5 Component editor
Figure 4-63
Example 1 - preprocessor statements
Preprocessor statements always begin with "#". Only these lines are evaluated as script by
the CMC package. Lines that do not begin with this character are imported into the file to be
created without checking.
The following preprocessor instructions are valid:
#Pragma Eol CRLF or LF
#Rem
#If, #ELIF, #ELSE and #ENDIF For controlled creation.
##
Example 2
A Linux shell script is created on the CF card, which, with the aid of the SED editor, deletes
all of the tool data from the INITIAL.INI if the variable is Up.Cfg >= 2.
232
Defines the end of the line indicator for the file.
Marks a line as comment.
Instead of #ELIF, #ELSIF can also be used.
For inserting lines that begin with #.
For creating preprocessor scripts by a preprocessor
script.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD