Start Page Logbook - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.11 Package execution
Project folder
When configuring, you can specify the name and path for the logbook in the project folder on
dialog page "Finish". This information is used as user-specified values in the dialog "Save
under" when package execution has been completed. Users can also modify these values.
If these values are missing, then the "Save under" dialog suggests a package name and the
location next to the package as default value.
These values configured in Expert are saved in system variables Up.
$Dialog.PackageEnd.LogDir and Up.$Dialog.PackageEnd.LogName, and can be
manipulated using a script during the package runtime. See Section System variables for the
Finish dialog (Page 295) and at DateTime>Example (Page 271).
Automatic logbook archiving
In addition to "manually saving" the logbook, the package always automatically saves the
logbook to the control.
For the PCU 50, the logbook with the name "<Package name_YYYYMMDDHHMM>"
(unprotected) or "<Package name_YYYYMMDDHHMM.htmlog.exe>" (password-protected) is
located under D$\UP and on the NCU under /card/install.
If the PCU and NCU are involved when executing the package, then the package is only
automatically saved to the PCU.
4.11.4.2

Start page logbook

An overview of the information is shown on the start page of the logbook.
You can see the following information when you start the log file:
● Start point of the package:
Specifies the date and time when the package was started.
● Shield version:
Specifies the Shield version with which the package was executed.
● List of all of the dialog pages used in the package, with the exception of the Note dialogs.
Note
The Note dialogs used are displayed using the system variables.
● File name under which the logbook (*.htm) was saved in the control.
● Specifies the number of warnings, user errors and system errors.
● Date and time of day when the package was exited.
● The dialog pages are opened using the logbook buttons; these navigate you to more
detailed information of the various sequences while the package is being executed.
The logbook buttons are described in detail in the following table.
324
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD