Siemens SINUMERIK 840D sl Operating Manual page 215

Actions tab
The actions to be performed by the component can be activated in the "Actions" tab.
The following actions can be created:
● Execute (Page 219)
● Delete (Page 223)
● Copy (Page 226)
● Change (Page 230)
● Manipulate (Page 236)
Sequence when executing actions
During execution of a component by the package, the activated actions (check box before the
action is activated) are executed from top to bottom according to the order in which they are
listed in the "Actions" tab.
Figure 4-56
If a different order is required, the order of the actions can be adjusted via the toolbar in the
"Actions" tab or via the "Up - Alt+Up" or "Down - Alt+down" context menu.
Actions opened for execution are assigned their own tabs in the component editor, which are
given the name of the action. You can adjust the order of the Actions tabs by dragging and
dropping, but this has no influence on the order of execution of the actions. For execution, it
also makes no difference whether an action is open or closed.
Note
With regard to the order and execution of actions, only the list in the "Actions" tab is relevant.
Editing an action
To edit an action, you must first open it by double-clicking or via the context menu. A tab for
this action is displayed, in which the actions to be executed can be configured.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
View of Actions tab with display of the individually open actions
Create MyConfig - Expert
4.5 Component editor
215