Interface Topo Xml; Example For Displaying The Wiring Using An Xml Image - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo

6.9 Interface Topo XML

6.9 Interface Topo XML
6.9.1

Example for displaying the wiring using an XML image

<?xml version="1.0" encoding="UTF-8"?>
<dp preliminary="true" build="008" appVersion="4.7.0.2"
version="4.7.0.0">
<bus subsystem="3">
dovar="doCU" name="NCU" compnr="1">
dovar="doLM" name="ALM" compnr="2">
dovar="doX" name="MM_X" compnr="3">
dovar="doY" name="MM_Y" compnr="7">
doref="doY" group="DQI_Y">
>
400
<slave address="3">
<control_unit_ncu doname="NCU_XY" donr="1" dotype="3"
<cliq index="0">
<line_module doname="ALM_XY" donr="2" dotype="3003"
<cliq index="0" uplink="true"/>
<cliq index="1"/>
<cliq index="2"/>
</line_module>
</cliq>
<cliq index="1">
<motor_module doname="X-drive" donr="3" dotype="11"
<cliq index="0" uplink="true"/>
<cliq index="1">
<motor_module doname="Y-drive" donr="4" dotype="11"
<cliq index="0" uplink="true"/>
<cliq index="1">
<sensor_module name="SM1_Y" compnr="9" sm="1"
<cliq index="0" uplink="true"/>
<encoder name="Enc1_Y" compnr="10" group="DQI_Y"/
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD