Siemens SINUMERIK 840D sl Operating Manual page 243

The following section data is admissible depending on the target area:
Target area
SINAMICS data
Display data
NC data channel assignment within the NC [C1] to [C10] or Chandata (1) to CHANDATA (10)
for the NC channels 1 to 10.
Examples
Display data
Syntax
BD[<section>].<BD-variable>
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Explanation
Subpath within the
drive system
HMI of the target sys‐
tem
[B3_S3_PS3]
p1082[1] = 9000
[SL]
$MM_FIRST_LANGUAGE = 1
Description
Value of the "BD-variable" display machine data item from the sec‐
tion "section".
Values for "section":
● ADV for HMI Advanced
● SL for SINUMERIK Operate
If the data is not found, null is returned.
Note:
EMB - HMI Embedded is no longer supported.
Example:
BD[ADV].$MM_TECHNOLOGY
Create MyConfig - Expert
Format
[B3_S3_PS3]
Notice
No leading zeroes must be used
No leading zeroes must be used for the figures.
These are not detected during the validation run for
replacement operators.
[ADV] - HMI Advanced
[SL] - SINUMERIK Operate
; SINAMICS drive data
; Maximum speed
; SINUMERIK Operate display data
4.6 Script language
243