Sinamics Device Configuration; Production Of Modular Machines - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo

6.6 SINAMICS device configuration

Example
Precondition: Create MyConfig is installed in the directory "C:\Program Files\SIEMENS\Create
MyConfig 4.7" and a project "TopoProj_1.upt" that contains the "Topo1" and "Topo2" topologies
is available in the path "C:\Topologie."
@echo off
PATH=%PATH%;"C:\Program Files\SIEMENS\Create MyConfig 4.7"
Topo.exe /silent "C:\Topologies\TopoProj_1.uptz:Topo1" /deploy xyz /
deploydir "D:" /target UTZ44
if %ERRORLEVEL% EQU 3 (
@echo "command line call errors!"
pause
)
if %ERRORLEVEL% EQU 2 (
)
if %ERRORLEVEL% EQU 1 (
)
if %ERRORLEVEL% EQU 0 (
)
6.6 SINAMICS device configuration
6.6.1

Production of modular machines

The Create MyConfig (CMC) engineering software supports both the automated production of
modular machines for the machine manufacturer as well as the upgrade of machines for end
customers, which requires only a limited number of operator actions.
The production of machines with 840D sl requires a basic commissioning of the SINAMICS,
generally designated as "System configuration". The system configuration can be performed
with CMC either as "Automatic configuration" or as "User-specified topology."
When the system configuration is configured in the CMC package, all the data sets and
optimization data in the step tree required within a series of modular machines in the maximum
machine configuration can be specified. The package is adapted to the specific version of a
modular machine either initially during the configuring or when the package is being executed
on the machine – either manually or using configuration files.
380
@echo "Faults during deployment!"
pause
@echo "Alarms during deployment!"
pause
@echo "Deploy executed without error!"
pause
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD