Siemens SINUMERIK 840D sl Operating Manual page 368

Create MyConfig - Topo
6.4 Topo - operation
Component properties
Each component can be assigned various properties, depending on the device class:
Component properties of user-defined topolo‐
gy (*.utz)
Property Description
Component group
Name Name of the component.
Article no. Order number of the component.
368
Component properties of comparison topology
(*.ust)
Note
Component names must be unique and have a
maximum of 50 ASCII characters.
You can specify the article number so that in addi‐
tion to the wiring, the package also checks the use
of the correct components based on the article
number.
If a position in the article number should not be
checked, you can do this by specifying an 'x' (e.g.:
6SL3120-1TE23-0Axx).
If an article number differs when executing the
package, the package generates an alarm that the
operator can ignore.
If a "?" is in a position, this position will be specified
by the SINAMICS on importing the user-defined
topology.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD