Repositioning the dockable window
You can adapt the dockable window with the tabs Verification, Cross references and Source
explorer, which can be selected and deselected, to your ambient conditions and the work
situation.
Procedure
1. With the default setting, the dockable window is anchored in the lower area of the Expert
interface.
2. To move the entire dockable window or only a tab in the right-hand working area, move it
by pressing and holding the title bar or tab from the current position to the working area in
which the positioning tiles are displayed.
Dock the window in the working area via the right-hand positioning tile.
Figure 4-2
Docking the dockable window in the right-hand working area via positioning tile
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.2 Introduction
95