Ncu/Ppu Result State (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 115)".
4.4.2.38

NCU/PPU result state (package execution)

Dialog view during package execution (for commissioning engineers / operators)
A data backup of the CF card including all current control data (NC, PLC, DRV) can be selected
on this dialog page.
After package execution, the data backup is stored with the name '<C cardID>_result.tgz' in
the folder named after the CF card ID, which is located next to the package.
You will find additional information on package execution in the section under Package
execution (Page 317).
Figure 4-46
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found under Meaning of buttons
(Page 126).
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
NCU/PPU result state - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
193