Siemens SINUMERIK 840D sl Operating Manual page 67

Description of buttons/fields of the toolbar
The buttons of the toolbar are described in more detail below.
①
Edit mode / Copy
The edit mode can be activated and deactivated using the "Edit mode" button. Using the "Copy
to the right" and "Copy to the left" buttons, all of the selected lines are transferred from one file
into the other. When the edit mode is activated, using the context menu, additional edit
functions can be applied.
This is how lines can be selected, deleted, copied and reinserted. Further, text in lines can be
modified. You can change the display mode using the shortcut menu.
The changes are saved in the file using the floppy disk symbol.
③
Update comparison
The update button is always shown in color if the displayed comparison result is not a current
result and the comparison should be restarted using this button.
④
Display/save HTML/XML report
The comparison result is shown in the standard browser (Internet Explorer) by clicking this
button.
The result can be saved as HTML file or as XML protocol.
The comparison result is output completely or, under "...like display," the output depends on
the settings made under
⑤
Comparison configuration
Using this button, a comparison configuration can be changed or a different comparison
configuration can be selected (see section "Configuration (Page 71)").
Note
An automatic selection of the comparison configuration as a function of the file type
identification is the default setting that can be manually changed at any time.
You will find more information about this in section "Configuring automatic file identification
(Page 77)."
⑥
Copy
A button to copy selected lines of the left-hand or right-hand file (see section "Copying from
the data comparison (Page 79)").
⑧
Group of buttons for displaying and hiding the comparison results
The associated lines (left only, unequal, equal and right only) of the comparison result can be
hidden or displayed using this group of buttons.
⑨
Differences in context
The "Differences in the context" button hides larger blocks with identical lines.
If more than three identical lines are located before or after a different line, then these (up to
three lines) are hidden.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
⑧
.
Create MyConfig - Diff
3.5 File comparison
67