Siemens SINUMERIK 840D sl Operating Manual page 234

Create MyConfig - Expert
4.5 Component editor
Note
Display of the target area
● Gray - target area does not contain any data.
● Red - data inserted in the target area is not permissible.
● Blue - linked data with resolution for deployment.
The following target areas are supported:
Archive
NCU
PCU
(Win XP and Win 7)
Operate
HMI-Adv (F:)
To enter change operations, use the context menu to create a "task" in the folder that contains
the file to be changed.
The name and path of a task specify the file to be changed.
Tasks can be created in the following ways:
● New task
– Enter the operations directly into the operation editor. You can choose any name for the
● Import task
– Import the operations that are saved in an external file. The task name is allocated the
● Link task
– An external file that contains operations is linked as a task.
Task editor
Based on the structure of the configuration files, change operations should be specified
specifying the section. They comprise an identifier, operator and possibly the value. Enter
these line-by-line. The context menu supports insertion of operators.
Lines that start with a semicolon ";" are not evaluated and can be used for comments.
234
Archive image
CompactFlash card of the NCU
Drives/shares of the PCU
Folder of SINUMERIK Operate
HMI-Advanced drive
task.
name of the imported file. After importing, the task name and the operations in the
operation editor can be edited without changing the original file.
The task name is assigned the name of the linked file and can be subsequently changed.
The linked file can be either edited externally or in the operation editor, whereby the
supporting context menu is available in the operation editor.
On deployment, the task is accepted in the package.
NC, MMC, NC_MMC, PLC, CP, DRV
user, oem, addon
C:, D:, E:, F:
hmisl or card
DH (data management), USER,
OEM, ADD_ON
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD