Siemens SINUMERIK 840D sl Operating Manual page 100

Create MyConfig - Expert
4.2 Introduction
Store in list
Load from list
Exporting into file...
Import from file...
Manage list...
Tools
Options...
Adapt Links
Convert
Window
New horizontal
tab
New vertical tab group
100
Package... tab
Dialogs tab > Package configura‐
tion...
Dialogs tab > Step tree...
Package tab
Dialogs tab > Package configura‐
tion
Dialogs tab > Step tree
Opens the "Save Configuration" dialog box. Here you select the configuration areas
to be saved:
● Package
● Dialogs
● Steps
Permits the import of the configurations from a file. The active step configurations
are overwritten by this import.
Package... tab
Dialogs tab > Package configura‐
tion...
Dialogs tab > Step tree...
Opens a dialog box in which the options can be set.
in the project...
in component...
in components of a storage fold‐
er...
from components of a storage
folder...
Delete backup files (*.bak)
Displays the selected component in the new horizontal tab group.
Displays the selected component in the new vertical tab group.
Permits storage of the active configuration (as
a file) in the "list of the project configurations"
on the Package tab.
Permits storage of the active configuration (as
a file) in the "list of the package configurations"
in the Package configuration dialog box.
Permits storage of the active step configuration
(as a file) in the list of step configurations in the
Step tree dialog box.
Permits uploading of a configuration from the
"list of project configurations" on the Package
tab. The active configurations are overwritten
by this upload.
Permits uploading of a configuration from the
list of package configurations in the Package
configuration dialog box. The active configura‐
tions are overwritten by this upload.
Permits uploading of a configuration from the
"list of step configurations" in the Step tree dia‐
log box. The active step configurations are
overwritten by this upload.
Permits the management of configuration lists.
Configurations can be copied, renamed, linked,
removed, edited, etc.
Links in the project and components can be
adapted.
Enables components from an older Expert ver‐
sion to be converted to the current Expert ver‐
sion in a folder.
Deletes the backup files created during the con‐
version.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD