Command Line Call; Packaged Deployed By Expert - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-116 Example Step tree dialog - display of the step script
Subinstance ServiceDate Transfer
ServiceDate Transfer belongs to the dialog - Service Platform Industry (GSP). The listed
actions are always carried out at the end of the dialog page Step tree, after the archive data
transfer, directly in the controller.
4.12

Command line call

4.12.1

Packaged deployed by Expert

Create MyConfig Expert can be started in the command line mode for the package
deployment. This is designed for the automated deployment of packages.
Command line parameters (switches) must be specified, which in some cases are optional, in
order for deployment in the command line mode.
These parameters can also be used to specify a package configuration file, which replaces
the configurations in the package.
If a package configuration file is specified, then these settings are applied to the package -
and this is followed by deployment with all of the specified command line parameters.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.12 Command line call
333