Filter According To Identifier Or Object - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.8 Cross references
Extended search using the search dialog
The extended search dialog is opened by clicking on the binoculars located to the left of the
search field.
Under Conditions / Direction, you can define the various search properties.
4.8.4

Filter according to identifier or object

A partial string can be entered in the input field by which the column "Identifier" or "Object" is
filtered. All objects are listed that contain this character string at any position in the name.
Filtering is reset by entering an empty string.
Procedure
If you want to filter the cross-references according to a certain string, proceed as follows:
Enter the desired string in the field using the keyboard or select "Go to position of use" from
the shortcut menu in the instruction editor to filter a selected identifier.
Filtering is applied to the "identifier" or "object" column.
308
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD