Figure 4-43
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found under Meaning of buttons
(Page 126).
4.4.2.36
Archive data transfer (package execution)
Dialog view during package execution (for commissioning engineers / operators)
During the display of this dialog page, the manipulated archive data of NC, PLC, and DRV are
transferred to the controller.
This dialog is not listed in Expert because it is called automatically from the package without
being configured when the package data of at least one of the areas stated (NC, PLC, DRV)
has changed.
You will find additional information on package execution in the section under Package
execution (Page 317).
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
2. Step tree dialog - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
189