Selecting A Paper Source - Canon LBP5360 User Manual

Selecting a Paper Source

A paper source can be selected using the following procedure.
■ When printing from Windows or Macintosh
Select a paper source in the printer driver. Because the default setting for the paper
selection in the printer driver is set to [Auto], if a paper size is specified by an application,
the printer selects the paper source automatically and feeds paper from the paper source.
Even when the paper source runs out of paper during printing, if paper of the same size is
loaded in other paper source, the paper source is switched automatically and the paper is
fed.
If you want to specify a paper source, select the paper source in the printer driver. For
details on using the printer driver, see Help of the printer driver.
■ When printing from DOS or UNIX
When you are printing from DOS, UNIX, or other operating system on which you cannot
use the printer driver, select a paper source using the control panel. The default setting for
this printer's paper source is set to AUTO.
Select a paper source with the printer's control panel using the following procedure.
1
Press the
PAPER SOURCE
PAPER SOURCE is displayed in the display.
2
Select PAPER SOURCE using [
PAPER SOURCE
=AUTO
3
Select the paper source using [
CASSETTE 1
=CASSETTE 1
(Feeder Selection) key.
→
→
→
→
→
] and [ ], then press [OK].
] and [ ], then press [OK].
Paper Source
4
4-13