...5.5 Configure Outputs
0-10mA
0-20mA
-----
4-20mA
AO1: Range
Linear
Bi-Lin
Log. 2
-----
Log. 3
AO1: Curve
Range
Set the analog output current range for the selected output.
Curve
Select the analog output scale required.
Linear
– Straight line between zero and span
Bi-Lin
– Bi-linear – see Fig. 5.6 on page 39
– Logarithmic, 2-decades – see Fig. 5.7 on page 39
Log. 2
– Logarithmic, 3-decades – see Fig. 5.8 on page 40
Log. 3
Note. The curve is fixed to
a) the analog output is assigned to temperature
or
b) the analog output is assigned to Sensor A or Sensor B (dual input analyzers only) and
is set to
Cond.Units
M.Ohms
Continued on next page.
AO1: Span Value
if:
Linear
(Section 5.3).
5 PROGRAMMING...
35