3.3 View Hardware
-----
VIEW HARDWARE
-----
Cond.
Sensor A Module
-----
Cond.
Sensor B Module
Analog
-----
Pb DP
Option Board
VIEW HARDWARE
Sensor A Module
Shows the type of input board fitted to the analyzer for the Sensor A input.
Cond. – 2-Electrode Conductivity
Sensor B Module – Dual input analyzers only
Shows the type of input board fitted to the analyzer for the Sensor B input.
Option Board
Note. Displayed only if the option board is fitted.
Displays the optional features enabled in the
See Section 3.4.
VIEW SOFTWARE
set to
Enable Cals.
SENSOR CAL.
set to
Enable Cals.
SECURITY CODE
(Section 5.9) – see Section 5.1.
set to
Enable Cals.
CONFIG. DISPLAY
(Section 5.9) – see Section 5.2.
Factory Settings
(Section 5.3) – see Section 4.1.
Yes
(Section 5.3) and
No
Alter Sec. Code
(Section 5.3) and
No
Alter Sec. Code
3 OPERATOR VIEWS...
page – see Section 7.3.
not set to zero
set to zero
11