...3 OPERATOR VIEWS
3.2 View Outputs
-----
VIEW OUTPUTS
12. 0 0
mA
50. 0
%
Analog Output 1
10
Theoretical Analog Output
There are up to four analog outputs, each showing information for one sensor.
Note. Analog outputs 3 and 4 available only if option board fitted and analog features
enabled – see Section 7.3.
Live current output value being retransmitted.
Current output shown as a percentage of full scale for the output range set in
– see Section 5.5.
OUPUTS
See Section 3.3.
VIEW HARDWARE
set to
Enable Cals.
SENSOR CAL.
set to
Enable Cals.
SECURITY CODE
(Section 5.9) – see Section 5.1.
set to
Enable Cals.
CONFIG. DISPLAY
(Section 5.9) – see Section 5.2.
Advance to analog output 2 (and outputs 3 and 4 if option board fitted and
Analog Output 2
analog features enabled – see Section 7.3).
(Section 5.3) – see Section 4.1.
Yes
(Section 5.3) and
No
Alter Sec. Code
(Section 5.3) and
No
Alter Sec. Code
CONFIG.
not set to zero
set to zero