ABB AX410 User Manual page 15

3.5 View Logbook
Note. The View Logbook function is available only if the option board is fitted and analog features enabled (Section 7.3) and
is set to (Section 5.10).
Logbook On
-----
VIEW LOGBOOK
Cals
Power
Errors
-----
Alarms
VIEW LOGBOOK
1
A1
-----
On
05:02:04 09:54
The logbook stores data entries for alarm events, sensor errors, power failures and sensor
calibrations.
View Logbook
Use the and keys to access the
Note. If no entries are stored in the
Alarms
The logbook contains up to 10 entries (entry 1 is the most recent), each comprising
Alarms
an alarm number, alarm state (On or Off), and the date/time of the occurrence.
Option board fitted and analog features enabled (Section 7.3) – see Section 3.6.
VIEW CLOCK
set to
Enable Cals.
SENSOR CAL.
set to
Enable Cals.
SECURITY CODE
(Section 5.9) – see Section 5.1.
set to
CONFIG. DISPLAY Enable Cals.
(Section 5.9) – see Section 5.2.
Advance to entries 2 to 10.
2 A1
Note. If no more entries are stored, the display shows
3 OPERATOR VIEWS...
logbook.
Alarms
logbook, the display shows
Alarms
(Section 5.3) – see Section 4.1.
Yes
(Section 5.3) and
No Alter Sec. Code
(Section 5.3) and
No Alter Sec. Code
.
No More Entries
not set to zero
set to zero
.
No More Entries
13